文章信息/Info

Title:

 Research Progress on the Plastic Instability Phenomenon of Magnesium Alloys

作者:

李傳強; 許道奎; 韓恩厚

 (1. 東北大學材料科學與工程學院，遼寧 沈陽 110819)
(2. 中國科學院金屬研究所材料環境腐蝕研究中心，遼寧 沈陽 110016)

Author(s):

 LI Chuanqiang1; 2; XU Daokui2;  HAN Enhou2

 (1. School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China)
(2. Environmental Corrosion Center, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China)

關鍵詞:

 ; 鎂合金; Portevin-Le Chatelier效應; 鋸齒流變; 變形機制

DOI:

10.7502/j.issn.1674-3962.2016.11.01

文獻標志碼:

A

摘要:

 在所有工程用金屬結構材料中，鎂合金的密度最低，具有較高的比強度和比剛度。然而，鎂合金在一定的塑性變形條件下會出現明顯的“塑性不穩定”現象，也被稱作鋸齒屈服（流變）現象或Portevin-Le Chatelier(PLC)效應，主要表現為應力-應變曲線上的鋸齒狀波動。近年來，關于鎂合金PLC效應的研究報道逐年增加。本文將重點介紹鎂合金中存在塑性不穩定現象相關的研究進展，敘述并歸納鎂合金PLC效應發生的條件、鋸齒屈服的特征、合金元素對鋸齒屈服現象的影響及對應的理論機制等。最后，指出目前研究中尚存在的問題，提出將來的研究重點和發展方向。

Abstract:

 Among all the structural metallic materials, magnesium alloys have the lowest density, higher specific strength and modulus. However, under plastic deformation conditions, magnesium alloys can exhibit the phenomenon of plastic instability, serrated flow or Portevin-Le Chatelier (PLC) effect, i.e. showing serrated waves on the stress-strain curves. Recently, research works about the PLC effects of magnesium alloys are widely carried out and increases annually. This paper is mainly concentrated on the research progress on PLC effect of magnesium alloys. The occurring conditions, characteristics of serration, effect of alloying elements on the PLC effect and relevant mechanisms are reviewed. Finally, the existing problems in current studies, research emphasis and direction in the future are also pointed out.