文章信息/Info

Title:

Review on Evaluation Methods of Material Interface Bonding Strength

文章編號:

1674-3962(2020)09-0681-10

作者:

宋曉毓; 劉新利; 吳壯志; 段柏華; 王德志

（中南大學材料科學與工程學院，湖南 長沙 410083）

Author(s):

SONG Xiaoyu; LIU Xinli; WU Zhuangzhi; DUAN Bohua; WANG Dezhi

(School of Materials Science and Engineering, Central South University, Changsha 410083, China)

關鍵詞:

界面; 結合強度; 評價方法; 靜態法; 動態法

Keywords:

interface;  bonding strength;  valuation method;  static method;  dynamic method

分類號:

TB33；TB302

DOI:

10.7502/j.issn.1674-3962.201905002

文獻標志碼:

A

摘要:

基于靜態法和動態法分類總結了材料界面結合強度的常用評價方法，靜態法主要包括剝離法、剪切法、拉伸法、彎曲法、納米劃痕法、激光劃痕法、激光層裂法和無損評價法等；動態法主要包括單擺沖擊劃痕法、多沖接觸疲勞法和滾動接觸疲勞法等。此外，材料界面結合強度評價還可借助有限元輔助分析，該方法可模擬分析靜態法、動態法等方法的測量過程。各種方法的優缺點及適用條件不同，因此應根據界面處兩種材料的熱學和力學性能等差異，選取合適的測量方法，再結合力學分析模型，選擇合適的求解方法，得到材料的界面結合強度。隨著新材料和新型表征技術的涌現，研究者們需要不斷改進現有的測試方法，使材料界面結合強度評價方法更加簡單易行、定量準確。

Abstract:

Based on the classification of the static method and the dynamic method, the common evaluation methods of material interface bonding strength are summarized. The static methods mainly include peel method, shear method, stretch method, bend method, nano scratch method, laser scratch method, laser spallation method and non-destructive evaluation method. The dynamic methods mainly include single pendulum impact scratch method, repeated impact contact method and rolling contact fatigue method. In addition, there is a finite element analysis method, which can simulate the process of the static method and the dynamic method. Each evaluation method has its advantage, disadvantage and applicable condition. According to the difference of thermal and mechanical properties of the two materials in interface, the appropriate measurement method should be selected, and then the appropriate measurement method should be combined with the mechanical analysis model to select the appropriate solution method to obtain the interface bonding strength of the material. In addition, with the emergence of new materials and new characterization techniques, it is necessary to continuously improve the existing testing methods, so that the evaluation methods for the material interface bonding strength are simple and accurate.